Making steady progress on my new workshop. Here are a few photos…
 Roughing out the underside of a floor joist with an axe first... |  ... then finishing up with the adze. When done, it is flipped over and the top will be flush with the sills. |  The west wall assembled to test the fit of all the pieces. |
 The braces are scribed to the posts and plates. This post had some wane that the brace was scribed to. |  The east wall is a little more complicated, with the addition of girts that will hold take the leant-to rafters. |  Detail of the east wall joinery. |
 Close-up of the tie beam to post joint, also showing the mortice for the porch plate. |  All of the joinery is cut with hand tools. Here is a shot of the boring machine in action. |  All of the transverse braces will be curved - here is the rough stock waiting final shaping and scribing. |